Tuesday, August 20, 2019
Ireland Starves and Lives to Tell: The Effects of the Great Potato Fami
Ireland Starves and Lives to Tell: The Effects of the Great Potato Famine ââ¬Å"It must be understood that we cannot feed the peopleâ⬠(Kinealy Calamity 75). The mid 1800s in Ireland were characterized by extreme poverty, death, and emigration. The Great Potato Famine, also known as ââ¬Å"The Great Hunger,â⬠first hit in 1845; however, its effects lasted into the 1850s and can still be seen today. Prior to the famine, Irish manufacture and trade was controlled and suppressed by British government, which made Ireland an extremely poor country. Farmers in Ireland were forced to export crops such as corn, wheat, and oats to Britain, which left the potato as the main dietary staple for the people, especially the poor. Therefore, when the fungus Phytophthora infestans caused some, and eventually all, of the crop to rot over the next couple of years, the reliance on the one crop made the people of Ireland extremely susceptible to the famine. The effects were devastating, and poverty spread across the nation causing a huge increase i n homelessness, the death-rate, emigration, and a change in the Irish people and country overall. One direct effect of poverty during the Great Famine was homelessness. ââ¬Å"The total number of people who had to leave their property was around a half millionâ⬠(Kinealy Calamity 218). Those who could not afford to pay rent to their landlords were evicted and had their homes destroyed (Kinealy Calamity 190). These people often resorted to ââ¬Å"begging in the streets, wandering from house to house, or burrowing in bogs or behind ditches, till broken down by privation and exposure to the elements [such as cold and disease], they seek the workhouse, or die by the roadsideâ⬠(Litton 98). Public ass... ...on: The Long View.â⬠The American Economic Review 84.2: 303-308. JSTOR. 6 February 2004. . Kinealy, Christine. ââ¬Å"How Politics Fed the Famine.â⬠Natural History 105.1: 33-35. Academic Search Premier EBSCO. Roesch Library, Dayton. 30 January 2004. . Kinealy, Christine. This Great Calamity: The Irish Famine 1845-52. Boulder: Roberts Reinhart Publishers, 1995. Litton, Helen. The Irish Famine; An Illustrated History. Dublin: Wolfhound Press Ltd., 1994. (98). Scally, Robert J. The End of Hidden Ireland: Rebellion, Famine, and Emigration. New York: Oxford University Press, 1995, (212-215). Woodham-Smith, Cecil. The Great Hunger: Ireland 1845-1849. London: Penguin Books, 1991, (226).
Monday, August 19, 2019
Training :: GCSE Business Marketing Coursework
Training Informal and Formal Training and Development Informal Training and Development Informal training and development is rather casual and incidental. Typically, there are no specified training goals as such, nor are their ways to evaluate if the training actually accomplished these goals or not. This type of training and development occurs so naturally that many people probably aren't aware that they're in a training experience at all. Probably the most prominent form of informal training is learning from experience on the job. Examples are informal discussions among employees about a certain topic, book discussion groups, and reading newspaper and journal articles about a topic. A more recent approach is sending employees to hear prominent speakers, sometimes affectionately called "the parade of stars". Informal training is less effective than formal training if one should intentionally be learning a specific area of knowledge or skill in a timely fashion. Hardly any thought is put into what learning is to occur and whether that learning occurred or not. (However, this form of training often provides the deepest and richest learning because this form is what occurs naturally in life.) Formal Training and Development Formal training is based on some standard "form". Formal training might include: a) declaring certain learning objectives (or an extent of knowledge, skills or abilities that will be reached by learners at the end of the training), b) using a variety of learning methods to reach the objectives and then b) applying some kind(s) of evaluation activities at the end of the training. The methods and means of evaluation might closely associate with the learning objectives, or might not. For example, courses, seminars and workshops often have a form -- but it's arguable whether or not their training methods and evaluation methods actually assess whether the objectives have been met or not. Formal, Systematic Training and Development Systematic, formal training involves carefully proceeding through the following phases: a) Assessing what knowledge, skills and /or abilities are needed by learners; b) Designing the training, including identifying learning goals and associated objectives, training methods to reach the objectives, and means to carefully evaluate whether the objectives have been reached or not; c) Developing the training methods and materials; d) Implementing the training; and e) Evaluating whether objectives have been reached or not, in addition to the quality of the training methods and materials themselves A systematic approach is goal-oriented (hopefully, to produce results for the organization and/or learners), with the results of each phase being used by the next phase.
Sunday, August 18, 2019
Sun Imagery in Shakespeares Richard III Essay example -- Richard II R
Sun Imagery in Shakespeare's Richard III Ã Ã Ã Shakespeare's Richard III is a play pervasive in figurative language, one of the most notable being the symbolic image of the sun and the shadow it casts. In an examination of a short passage from the text, it will be argued that Richard is compared to a shadow in relation to the sun, which has traditionally been held as a symbol of the king. The passage is significant not only because it speaks volumes about the plots of Richard, but also because it is relevant in understanding the overall plot of the play, which in the first few acts is almost indistinguishable from the plot of the scheming Duke of Gloucester. Ã The comparison of Richard to a shadow is especially clear in an exchange between Richard and Queen Margaret: Richard Gloucester: Our eyrie buildeth in the cedar's top, And dallies with the wind, and scorns the sun. Queen Margaret: And turns the sun to shade. Alas, alas! Witness my son, now in the shade of death, Whose bright outshining beams thy cloudy wrath Hath in eternal darkn...
Saturday, August 17, 2019
Industrial Education
Anything made of metal, no matter how big or small, can be welded. Examples are everywhere, from vehicles like cars, trucks and motorcycles to rail cars, ships, aircraft, rockets and space stations. Construction is a huge market, and skyscrapers, bridges and highways would be impossible to build without welding, as would oil and natural-gas pipelines, offshore oil platforms, giant wind turbines and solar panels. Welders help install and maintain boilers, antipollution systems and other large structures, as well as piping for industrial, commercial and residential facilities. Welding is even used by artists to create sculptures and decorative items. There is almost no limit to what welding can do, especially since developments in the technology continually improve its accuracy, quality and versatility. Welding is, in fact, an increasingly high-tech skill. Welders are being trained to operate robots and other automated systems that use powerful lasers, electron beams and sometimes explosives to bond metals. The ability to work with computers and program software is consequently vital to the successful operation of these systems. Don Howard, a welding specialist at Concurrent Technologies Corp., an engineering firm in Johns town, Pa., estimates that 20%-25% of U.S. welding is automated and predicts this trend will grow by about 20% in the next few years. ââ¬Å"A lot of very intelligent people are coming into the welding community,â⬠says Howard. There is money to be made, he notes, but the industry also offers career paths. ââ¬Å"Welding is not just about working on a manufacturing line anymore. Once in the industry, people know they can find a niche.â⬠ââ¬Å"These are good times to be in welding,â⬠says Patricio Mendez, director of the Canadian Center for Welding and Joining at the University of Edmonton in Alberta, Canada. Mendez notes that students who like designing and building with metal and are interested in fields such as materials engineering, robotics, lasers, computer programming and systems integration will find plenty of career opportunities in welding. Many students are introduced to the process by virtual welding. This simulation program is being developed by the Edison Welding Institute of Columbus, Ohio, to teach the basics of welding in classrooms. ââ¬Å"The objective is to give students a virtual experience that is very much like the real thing,â⬠says John Coffey, engineering manager at. The system uses sensors that duplicate the look and feel of welding. There are more than 80 welding processes. Most involve a skilled worker using a high-heat torch (2,800-plus degrees Fahrenheit), filler material that is usually in wire or stick form (though some welds donââ¬â¢t use fillers) and pressure to permanently bond metal pieces. Welding can also be used to cut and dismantle objects of all sizes as well as for repairs. The most common process is Gas Metal Arc Welding, or GMAW. In GMAW, an electrode, which is also the filler, is continuously fed through the nozzle of an arc torch. When the welder activates the torch, several operations take place: The electrode begins feeding through the nozzle, a direct current is generated that creates an arc when it comes in contact with the electrode and shielding gases are released around the nozzle to protect the weld from atmospheric gases that could degrade its quality. The arc, whose movement the welder controls, consumes the electrode, fills in the weld joint and creates the weld. Other widely used techniques like Gas Tungsten Arc Welding (GTAW) and Shielded Metal Arc Welding are variations of the process. GTAW, for example, is a relatively low-heat method that uses a non-consumable tungsten electrode. Its low-heat characteristic reduces distortion in thin metals, such as those used in aerospace, also called ââ¬Å"stick welding,â⬠uses a flux-coated consumable electrode (ââ¬Å"fluxâ⬠is a chemical cleaning agent that removes oxidation from the metals to be joined) and is primarily used for repair and steel welding. As the electrode burns, the flux disintegrates, which releases a shielding gas that protects the weld from degradation. In more advanced welding technologies, lasers are combined with in a hybrid process to make what one expert calls ââ¬Å"scalpel-like cutsâ⬠that are up to à ½-inch deep, narrow and extremely precise. The part of the process then deposits the filler and melts it with a secondary heat source. The influence of welding is so broad that many of the product designs and building techniques people take for granted would not be possible without it. With demand for skilled welders rising and the technology of welding becoming more advanced, especially where automation is concerned, students have a unique opportunity to learn a career that can be shaped around their interests.
Friday, August 16, 2019
Acetone Research Paper
Acetone is an extremely popular solvent that is used in rubber, resin, plastics, lacquers, varnishes, and rubber cements. It is also used in the creation of fats, oils, and waxes where is a primary component. Acetone has many uses in modern technology including those that relate to the medical field and various domestic uses. It is a very important organic compound found in everyday life, but it is also a toxin and can be an extremely dangerous environmental pollutant.Acetone has many valuable uses in modern life and many American companies use Acetone as one of their key components to many household items. There are many ways that Acetone is used everyday. One of the most common purposes of Acetone and one of its most well known, is the use of Acetone as a primary ingredient in nail polish remover. Acetone is also commonly found in the use of artist and craft makers. Similar to nail polish remover, Acetone can be used in other artistic agents. A common use of Acetone is for the remo val of residues off metals, glass, and porcelain.It also commonly used as a remover of superglue. Acetone is also used greatly by make-up artists in order for them to easily remove skin glues and adhesives from fake moustaches and wig materials. There have been many claims that Acetone is dangerous to the humans due to concentrated exposure from these very sources, which has been proven true. Concentrated exposure has been proven on numerous occasions to have an adverse affect upon humans. There are many negative health effects from exposure to Acetone, and each one differs from different types of exposure.According to the National Pesticide Information, there four ways exposure to Acetone can occur. The first is through inhalation, which can cause the symptoms of confusion, coughing, dizziness, headaches, sore throat, and unconsciousness. The second form of exposure is through direct contact with the skin. This can cause dry skin and rashes. The third way is exposure to the eyes, w hich can cause redness, irritation, pain, blurred vision, and possible cornea damage. The fourth and final way of exposure is from ingestion.Ingestion can cause the same symptoms as inhalation as well as the possibility of nausea and vomiting. Clearly, there are many health risks to the exposure of Acetone. Along with these mentioned symptoms, there have also been studies that have shown possible dangerous and long-term health risks to concentrated exposure. These studies have shown that concentrated exposure has lead to fainting and long-term effects have shown to be kidney, liver, and nerve damages. There have also been studies that support that birth defects and male reproductive problems were also health concerns due to long-term exposure.While there appear to many health risks due to exposure of Acetone, Acetone itself is actually considered a relatively safe compound if used properly. According to The National Health and Medical Research Council, Acetone has been rates General ly Recognized as Safe. Many manufacturing companies see Acetone as safe is exposure is minuscule and to the minimum. Because of this, Acetone can be found in beverages, pastries, desserts, processed and unprocessed foods, and is also found in a variety cosmetic and beauty products.While Acetone is considered to be only slightly hazardous to many manufacturing companies, it is important to recognize what Acetone truly is. Allow Acetone exhibits relatively low dangerous properties, it can deadly when properly exposed. Acetone is still considered a toxic chemical and can cause devastating destruction if exposed as an environmental pollutant. While Acetone does not pose much threat to humans in moderate doses, just slight exposure to the environment can completely upset an ecosystem. When exposed to the environment, Acetone is typically found polluting groundwater areas.This is due to Acetoneââ¬â¢s high water solubility in water. In water, Acetone can cause great health defects to wi ldlife. Because common groundwater would be the home and drinking source of many organisms, Acetone pollution can quickly cause health problems and sicknesses in a surrounding ecosystem. The most common wildlife affected by Acetone are those that are water based. Studies have shown that fish and amphibians exposed to high levels of Acetone have numerous internal health defects, which include deformation to the reproductive organs.Acetone has also been shown to cause a risk of oxygen depletion in these aquatic areas. Acetone is also known to evaporate relatively quickly, which allows it to dissipate and spread into the atmosphere even when properly disposed of. Acetone is one of the most used solvents in the world and is found in numerous consumer products. From an economic standpoint, Acetone is found to be a relatively safe chemical. However studies have shown that exposure to Acetone can lead to adverse effects in humans. Acetone has also been shown to be an extremely deadly envir onmental pollutant, which can destroy ecosystems.
Thursday, August 15, 2019
Describe the main theoretical models of child abuse Essay
Medical model, sociological model, psychological model, feminist model and contextual model are all theories relating to abuse. Although there are many different types of child abuse and many different reasons why it may occur, most cases have been wilted down to fit into one of the five main theories named above.à Medical mode is when the reason for abused is classed as a disease or an illness. Kempe and Kempe were the inspiration for this theory when they described it as battered child syndrome which was linked to Bowlbyââ¬â¢s theory on attachment. Bowlby came to the conclusion that children who failed to form this bond with their mother in the first three years of the childââ¬â¢s life would have problems in later life bonding with people and trusting people. He also described a child with a lack of bonding to be an affectionless psychopath, which he described to be someone who shows lack of guilt when done something wrong has difficulties showing emotion to things around them or someone with behaviour problems. Another affect of not having an attachment in this critical period as it was also known in Bowlbyââ¬â¢s eyes was development retardation which meant the child may grow up with learning difficulties or slower intellectual skills. So if the main caregiver failed to have a strong bond when they were young then they may find it difficult to form a bond with the child. It is a vicious cycle that goes round and round. This type of abuse is shown in the case study in some ways. This is because the mother of the children had failed to form a bond with her mother, and there for she is struggling to form a bond with her children. Will these children grow up failing to form a bond or a strong relationship with their children because of this? Bowlby would have described Kerry, the mother as an affectionless psychopath. Sociological model is all about the environment that the child is being brought up in and around. Areas of social deprivation are often linked with abuse which has been proven in some research that has been carried out. Children need to be safe and grow up in healthy environments for them to get a good start in life and grow up healthy. Some people react to how they were treated when they were growing up. In other words if a child is abused or neglected then there is a higher chance that when they grow up they will forward this behaviour on to the children in their care. This is because this is what they are used to and they may think that it is normal was to treat children if they have seen no different. Another reason may be they feel that they have to suffer through it all and so should their children. It is not always this case however, some abused children grown up with the determination to treat the children with the love and kindness that they never received themselves. The case study states that the children are living in a high rise block of flats with faulty wiring, damp, and a lack of hygiene. The children are constantly around alcohol, drugs and known criminals. This is definitely not an appropriate environment for the children to be around and this is why I feel it fits in to this area of abuse.à Psychological model is based around the family and its relationship status. It involves one particular member of the family being scapegoated by the rest of the family and getting the blame for all the problems that arise in the family. This type of abuse can be linked with the case study because the older child Katie gets blamed for a lot of the things that go wrong in the flat especially linked with her brother. Her brother is only a baby and if he cries then Katie gets in to trouble. She is given the responsibility to take care of the baby even though she is only 3 years old herself.à The theory described as the feminist model is about the different sexes and the power and force in which the male figure has. This theory links mainly with sexual abuse.
College Is It Worth It Essay
Right now in our society university education is no longer an option or privilege, but rather a necessity. We are practically raised and conditioned to believe that one needs higher education in order to succeed in life. There is a saying that says ââ¬Å"if you think education is expensive, try ignorance. â⬠But as technology is constantly advancing and computers are running almost anything, is a college education really necessary? There are people who have never set foot in a college and are doing better than people who have their masterââ¬â¢s degree. There are views from both sides that contain a valid argument. The main reason why people go to college is not because they want to but because they have to. Most 11th and 12th graders are pressured by their parents to go to college because it is ââ¬Å"the right thing to do. ââ¬Å"â⬠In the essay that Caroline Bird wrote ââ¬Å"College is a Waste of Time and Moneyâ⬠, she states that students go to college because â⬠. . . Mother wanted them to go, or some other reason entirely irrelevant to the course of studies for which college is supposedly organized. â⬠The student may have different ideas about what he or she wants to do in life, but because they think that their parents know what is best for them, they probably end up doing something they do not want to do, resulting in being miserable and resentful. Letââ¬â¢s face it, going to college is socially prestigious. Most people go to college only for the title of being called a college student. For some young people, it is a graceful way to get away from home and become independent without losing the financial support of their parents. They do not want to be looked down upon so they do what would look ââ¬Å"best in the eyes of societyâ⬠. It is practically beat into our heads that in order to be a respectable citizen of society, you should have some sort of university education. Being a college student is perhaps a more respectable role than being, for example, a clerk or a garbage man because of the negative connotations such jobs receive. Going to college and getting a degree does not necessarily guarantee that an individual is going to get a job right after graduation. It is hard out there for recent graduates to find a good job since there is so much competition due to the insanely increasing numbers of our population and a wildrace for the lions share in every field. Even if they do get a job, it is usually not in what they got their degree for. Many college students would feel that college is a waste of money because they do not learn what they want to. Instead they have to take classes that have close to nothing to do with their major but are only taking these classes in order to fulfill a general educational requirement. Upon graduation, some feel that they are at a disadvantage because more time could have been spent on learning more within their field of study and less on irrelevant materials. Now for the pros of having a professional college education. The major reason of going to college is, of course, to get a good job. College prepares us with academic knowledge in order to succeed in the future. According to Ernest Boyner higher education is essential for preparation for oneââ¬â¢s future. He states that: In spatial terms, teaching and learning may begin in a classroom, but course work also spills over into the life of the campus and the community. Students engage in experimential learning and co-curricular activities that take abstract ideas and anchor them in real-life problems. As the competition to get a decent job is increasing, it is close to impossible to obtain a high paying job without at least a bachelorââ¬â¢s degree. Many jobs that only used to want their workers to have a high school diploma now require some college education due to their extremely complicated nature. Another way college is worth the money, however, is because it is one of the few institutions that often contains people of different ethnic and racial backgrounds. Such a situation allows one to develop their social and communicative skills because they are exposed to unfamiliar cultures. This is necessary for the fact that a person does not want to come across as ignorant towards a certain culture. This only, however, comes in handy when you are being educated abroad. College is like a stepping stone to becoming a responsible adult because for the first time most people are practically on their own (that would definitely include me). It is completely different from high school in that not only that school has to be dealt with, but you have to juggle your personal time and financial state as well. They go away to college and face circumstances that they would most likely come across when they finally do go on their own. Bills have to be paid, time has to be managed efficiently, and deadlines have to be met, just like in the ââ¬Å"real world. â⬠College is not only about getting a good job ââ¬Ëbut about acquiring knowledge and broadening oneââ¬â¢s horizon. A lot of courses that are at school are not needed for a certain major but are just there for interested people who want to learn more about a certain subject. Bowen explains this by breaking it down into three aspects: â⬠¦ the specific goals for the education function are derived. This functionâ⬠¦ is intended to help students develop as persons in three respects: cognitive learning, by expanding their knowledge and intellectual powers; affective development, by enhancing their moral, religious, and emotional interests and sensibilities; and practical competence, by improving their performance in citizenship, work, family life, consumer choice, health, and other practical affairs. It is sometimes just as good to be an intelligent person and know about a lot of things instead of being someone who makes a lot of money. My admission into an arts college after a lifetime of struggle of being an a-grade science student, had led me to seriously consider the complexity of this topic and what i have learned is that college definitely has its pros and cons. But I think that college is what you make of it. It can be the best time of your life, but only if you want it to. You can take the pessimistic view about it and think that college is a waste of money, or it can be looked at as a challenging and exciting new frontier that basically will set the precedent for the rest of your life. No matter what i learn in this environment that has been setup on an organised platform to produce strong and self assured individuls that will help make this deteriorating world a better place to live in ,even if we doââ¬â¢nt do it conciously, what I know for sure is that the education I recieve in this college will always be of invaluable worth once i step out in the ruthless fish-eat-fish world.
Subscribe to:
Posts (Atom)